ESD TABLE MATS

ESD TABLE MATS

1.Material:

ESD rubber mat made of anti-static(conductive) and static-

dissipative materials as well as synthetic rubber. The surface layer

is a 0.5mm thick static-dissipative layer. The bottom layer is

1.5/2.5mm conductive layer. Generally, 2mm/3mm thick double-layer structure is used.

2.Description:

1).Anti-static rubber mat or ground mat should be laid out in the

workshops and advanced laboratories for microelectronic industries

such as electronic semi-conduct devices, electronic computers,

electronic communication equipment and integrated circuits etc.

2). When anti-static rubber mat (ground mat) are laid out and

grounded, the working surface will discharge the static electricity

of human bodies so that a near-equipotential can be maintained for

ESEDS tweezers, tools, utensils and instruments, through which

human bodies contact the working table and static sensitive

devices(SSD) are free from broadband interference produced by

static discharging such as triboelectrification etc. In this way,

electrostatic protection is realized

3). To eliminate damages caused by static electricity.

3.Application

Electronics Factory

Pharmaceutical factory

Chemical plant

Clean room

Laboratory

4.Specifications

Thickness 2mm/3mm/4mm/5mm

Width 1m/1.2m/custom made

Length 10m

Color Green/ Grey/Blue/Black

Surface effect Dull/Glossy

Up side surface resistance 10E7-10E9 ohm

Bottom side surface resistance 10E3-10E5 ohm

Contact information